Afinia Wins Make Magazine 3D Printer Buyer’s Guide Competition

Our Afinia H-Series 3D Printer won the 2012 Make Magazine 3D Printer Buyer’s Guide competition. Out of 15 3D printers that were reviewed, we won Best Overall ExperienceEasiest Setup, and tied in the Easiest To Use category.

Make Magazine’s editors called our H-Series, “[A] Clear winner” and “Easy to use, with feature-rich software and impressive print quality.”

During the 11/5/12 Google Hang Out, Gareth Branwyn, Make Magazine’s Editorial Director, illustrated the unique precision of the Afinia H-Series 3D Printer. At 19:00 he held up a print of Cushwa’s “Owl Statue” and talked about noticing that there was actually a nostril hole in the owl’s beak. Gareth remarked, “No other printer [other than the Afinia H-Series] was able to render the hole.”

Another example of the printing precision of the Afinia H-Series was referenced by showing an example of J_Hodgie’s “Nautilus Gears With Modified Bar”. At 20:51 in the same video, Gareth pointed out, “Very few of the printers were able to print out all of the pins.” In addition, the Afinia H-Series was only one of two printers to successfully complete the “Torture Test”, created by Cliff Biffle, one of the Make Magazine testers.

Learn more about our incredible 3D printer.

Comments

  1. Stan Kandel says:

    In the Afinia store I’d like to see STL files for many objects for use in hobbies. Also, the ability to order an STL file on a particular object. If you don’t want to get into the service business, could you supply a list of companies or individuals who would like to supply this service.

  2. Hugh byard says:

    Do you make printers for jewelry applications?

    • Afinia3DPrint says:

      Hugh: Our printer has a resolution of 150 microns. Will that work for your jewelry application?

Speak Your Mind

*